Hawking Technology H-BR49 - Manual (Page 20)

Device/Computer Name
Enter a descriptive name for
identification purposes. Some Internet
Service Providers (ISP) require this
information and if that is the case,
they will provide you with the name.
Domain Name
For example: yourcompany.com. The
maximum input for this field is 32
alphanumeric characters and it is case
insensitive
IP Address
Enter the information provided by
your ISP.
Subnet Mask
Enter the information provided by
your ISP.
Gateway
Enter the information provided by
your ISP.
Primary/Secondary
Enter the information provided by
your ISP.
SAVE After completing the settings on this
page, click SAVE to save the settings.
UNDO Click UNDO to clear all the settings
on this page.
LAN Port
This screen contains settings for the LAN interface corresponding to the local
network. You can change the setting to distribute the IP address to local PCs, if
desired. If “Distribute IP address to local computer” is selected, users can enter
the IP addresses assigned for the computers on the LAN. The number of IP
addresses decides the number of clients allowed for the assigned IP addresses.
Note that all the PCs on the same LAN should use the same subnet Mask.
Users can also set Static DHCPs on this page. Users are allowed to set 32 Static
DHCPs. Using this feature, the device will assign the same IP address to a
computer (according to the network adapter’s MAC address) and this computer
becomes the only one able to request that IP address. This is quite useful to set
virtual servers which specifically require fixed IPs for outside Internet access.