Hawking Technology H-BR49 - Manual (Page 32)

Check E-Mail
Check E-Mail: You may input your mail account on this IP Share and the device
will check e-mails at the frequency that you previously set for the desired
interval time.
1. Select the LED number and enter the account name, password, the name
of the incoming mail server (POP3: i.e. mail.myaccount.com) and the
interval to check mail.
2. Check Enable to enable this IP Share to indicate when there’s email(s)
detected.
Depending on the number of emails in the mailbox, the MAIL ALERT LED
will flash in different frequencies. For details on the email LED indication, refer
to the previous section, titled “Parts Names and Functions”.
Figure 19
Email Account
Account Enter the email account name you want to check for email information.
Password Enter the password for the above email account for authentication.
Incoming Mail
Server Enter the incoming mail server name (POP3) corresponding to the email
account you want to check.
Interval to check Enter the time interval that you would like the device to check the email.
UNDO Click UNDO to clear all the settings on this page.
SAVE
After completing the settings on this page, click SAVE to save the
settings.
Check to enable the MAIL
ALERT
function.