Humax PVR-8000 - Manual (Page 12)

GB10
• When a user has two antennas (Hotbird and Astra):
Connect two antennas to DiSeqC and input outputs to Tuner A.
Then input the signal input to Tuner A to Tuner B using a splitter or loop through.
• Note : A splitter is recommended in the Single mode. (For Tuner A, use a splitter with
the function of DC bypass, and for Tuner B use a splitter regardless of the function of DC
bypass.) When using a loop through in the Single mode, use when the single
level is over 25%. Otherwise, it is recommended to use a splitter.
Use only a splitter in order to connect another set-top box using a loop through to your PVR.
2) When setting Antenna Configure to Dual:
To provide Live and Timeshift services through Tuner A, and Recording service through
Tuner B, input a signal source of the same attributes with the signal input to Tuner A to
Tuner B.
(Hotbird) (Astra)
(Hotbird)
(Hotbird)
(Hotbird)
(Astra) (Hotbird) (Astra)
PVR-8000 ENG 1/21/03 11:10 PM Page 15