Humax PVR-8000 - Manual (Page 40)

GB GB38
Select the default language for subtitle when changing services.
Language provided: English, French, German, Italian, Spanish,
Portuguese, Hungarian, Finnish, Danish, Swedish, Norwegian,
Greek and more.
Move the cursor to the current time and press the OK button.
Then the time setting window that has been described in an
overview of PVR will appear, and you can change the time.
You can also change the Correction Channel that was highlighted
in gray in the time setting window.
You can set the Current Time and Wakeup Time in this mode.
Furthermore, the Service Number in the Wakeup mode and Sleep
Time (standby mode) can be set. If a VCR is connected, recording
can be automatically done according to Wakeup/Sleep Time
Setting.
Users can directly enter Date, Time and Correction channel.
The time setting will be used as the standardised time for the
Information box, TV EPG, Radio EPG, Wakeup and Sleep Timer.
To change the Current Time:
Press the OK button, then “ Time Setting ” will appear.
Select Date/Time/Correction Channel using the buttons.
It shows the correction channel that has been selected at the
current time.
1. Move the cursor to Wakeup Time.
2. Press the buttons to select enabled or disabled.
3. If Enabled is selected, Time Input window is displayed.
4. Enter the time in the order of hour and minute, using the
NUMERICAL buttons (0~9).
5. Press the OK button to complete Wakeup Time setting.
Subtitle Language
Time Setting
Current Time
Correction Ch.
Wakeup Time
PVR-8000 ENG 1/21/03 11:10 PM Page 43