Humax PVR-8000 - Manual (Page 18)

GB GB16
To adjust the volume level, use the V+/V- buttons.
To temporarily reduce the sound volume, press the MUTE ( )
button.
To cancel mute, press the
MUTE ( ) button again or press
the V+/V- buttons.
Use your TV Remote Control Unit to control the Teletext service.
The teletext button doesn’t exist on the STB Remote Control Unit.
When the service supports Teletext, the Teletext icon( ) is
displayed on the I-plate.
If the current broadcasting programme provides subtitles, press
the
SUBTITLE ( ) button to see the current subtitle language list.
To change the subtitle language:
1. Press the SUBTITLE ( ) button.
2. Use the buttons to select the Subtitle language you want.
3. Use the button to move to the operation window.
4. Use the buttons to select on mode and then press the
OK
button.
To cancel the subtitle mode:
1. Press the EXIT button during showing subtitle.
2. Or press the SUBTITLE ( ) button.
Use the button to move to the operation window.
Use the buttons to select off mode and then press the
OK
button.
When you want to change the audio language of current service,
press the
SOUNDTRACK ( ) button first.
The soundtrack menu is displayed on the top to left side of the
screen.
To change the audio language:
1. Move the cursor to the desired language on the Track window
using the buttons.
2. Use the buttons to select one among Both, Left and Right
from the Audio output item.
If the current service is switched, the audio language returns to
the audio language that was selected in previous service.
lf the returned audio language is invalid, the audio language that
you selected from the audio language menu has the priority of
playback.
Volume Control
Subtitle
Sound Track
Teletext
PVR-8000 ENG 1/21/03 11:10 PM Page 21