Humax PVR-8000 - Manual (Page 27)

GB GB25
Main Menu Guide
• Rename
To rename the current service:
1. Move the cursor and select Rename on the Operation
window and press the OK button to rename current service.
The Input Text window will appear.
2. Enter the service name using the NUMERICAL buttons
(0~9) on the Remote Control unit.
3. The Input text window will appear and you can type the
Channel Name directly.
If you input the Channel Name with the remote control unit,
the first press of a numerical button is recognised as a
numerical input, and the next press of the same button is
recognised as an alphabet input. (For example, if you press
the numerical button 1 repeatedly, the input character
switches in the sequence of 1 A
B C 1.)
Press the button to input the next character.
Press the button to cancel and Press the
OK to confirm.
Use this window to move group marked channel at the
selected category and sort.
To move, skip and lock or to register the present channel
to the desired.
1. Press several channels using the OK button.
2. Press the ( ) button.
3. Select an item at the desired category and save.
A window, which shows detailed information about a file or is
used to change attributes of a file. It consists of Category, Item,
Operation and File Information.
To activate it, press the ATTR ( ) button while the active cursor
is located on a file in the Channel List window (File).
Then information about an appropriate file will be displayed.
Even if an active window doesn’t exist during the playback of a
file, you can activate it using the
ATTR ( ) button.
Attributes of a file are Lock/Unlock. To change the attribute, place
the cursor on ON/OFF of Item and press the
OK button. Then the
changed attribute will be displayed on Category immediately.
File Information shows the name of a file, start time of recording,
date and recording time, and it shows information about the CAS
system when a scrambled service has been recorded.
Group Attribute
File Attribute
PVR-8000 ENG 1/21/03 11:10 PM Page 30