Humax PVR-8000 - Manual (Page 35)

GB GB33
Main Menu Guide
If you use a dual LNB or two antennas connected to a 22KHz Tone
switch box, make 22KHz Tone switch Enable or Disable to select
LNB or antenna by using the buttons.
According to the option and position of DiSEqC switch,
select Disabled, Tone Burst A to B and DiSEqC A to D.
After setting the above mentioned value, press the
OK button to
move to the Manual Search menu.
The Motorised System is used to set the DiSEqC 1.2 motor by
Eutelsat specification.
If you wish to use this system, please refer to page GB52.
Set the search parameters (Frequency, Polarisation, Symbol Rate,
etc.) to manually find the services that you have selected in the
transponder. The bar on bottom of the submenu displays the signal
level and the signal quality(BER) of the entered parameters.
After the above-mentioned value is set, select Search on the
Operation window.
Select the target antenna for Manual Search.
The Satellite Name helps you select Antenna Alternatives.
This is only for reference and cannot be changed on this menu.
Antenna alternative 16 is fixed for SMATV.
1. Press the button to select antenna alternative you want.
Items on the right side display all the selectable lists of antenna
alternative assigned from antenna setting.
22KHz Tone
DiSEqC Input
Motorised System
Antenna Alternative
Manual Search
PVR-8000 ENG 1/21/03 11:10 PM Page 38