Humax PVR-8000 - Manual (Page 32)

GB GB30
You can set a parental guidance rating to each programme in this
mode.
1. When the Parental Control is selected using the buttons
in the Main menu, a display window for entering the PIN code
will appear on the center of screen.
** The default PIN code is .
2. Enter the PIN code on the display window.
(If any problem occurs when entering a PIN code, you cannot
switch to the next mode.)
3. Set the parental guidance rating of highlighted Censorship
classification.
4. Press the buttons to select the parental level.
The parental level is displayed as age-based numbers:
no block, 6, 10, 14, 18 and total block. Enter the PIN code to
unlock or lock programmes.
5. To change your PIN code:
• Select the highlighted Old PIN code using the buttons
and then enter your Old PIN code.
• Enter a New PIN code in the highlighted New PIN code using
the buttons.
• To verify the New PIN code, re-enter a New PIN code in the
highlighted Verify Changed PIN code.
6. If the entered PIN code is correct, then all settings are
completed. (If the PIN code is wrong, the message " PIN code
mismatch " will be displayed on the display window. If the OK
button is pressed at this time, the Old PIN code is valid and
the cursor is located in the first position of this menu.)
3. Parental Control
0000
PVR-8000 ENG 1/21/03 11:10 PM Page 35