Humax PVR-8000 - Manual (Page 38)

GB GB36
Performs a manual search with the ability to enter
PID(Video/Audio/ PCR) values. This mode is necessary when you
search for the signal that has abnormal service Information tables.
The setting of the sub items is the same as Manual Search.
You can set PID to search for services.
1. Press the buttons to select User Defined and press the OK
button.
The Input PID window will appear.
2. Press the buttons to select Decimal or Hexa.
3. Use the
NUMERICAL buttons (0~9) on the remote control unit
to enter a decimal PID value.
4. In the hexadecimal input mode, press one of the NUMERICAL
buttons (0~9) to display a hexadecimal keyboard.
5. Enter a hexadecimal PID value.
Note : If no PID is input (Auto is displayed), the PID Search
function is same as Manual Search.
6. After the above mentioned value is set, select Search on
Operation window.
Note : The picture and the found service list during Advanced
Search are identical to the ones found during Manual
Search.
Advanced Search
Video PID/Audio PID/PCR PID
PVR-8000 ENG 1/21/03 11:10 PM Page 41