Humax PVR-8000 - Manual (Page 36)

GB GB34
1. Press the OK button to select the User Defined.
The Frequency Input window will appear.
2. Use the NUMERICAL buttons(0~9) to enter frequency the
remote control unit.
Select Polarisation for manual search.
1. Press the button to select Polarisation you want.
Items on the right side display all the selectable lists of
Polarisation. (Auto, Horizontal, Vertical)
• Horizontal : 18 V is output through LNB line
• Vertical : 13.5 V is output through LNB line
Select Symbol Rate for manual search
1. Press the button to select symbol rate you want. Items on
the right side display all the selectable lists of symbol rate.
2. If the required symbol rate is not available then select User
Defined and press the OK button.
3. The numerical input window will appear and you can enter
the symbol rate manually, using the NUMERICAL buttons (0~9).
Select FEC for manual search.
1. Press the button to select FEC of transponder you want.
Items on the right side display all the selectable lists of FEC.
You can select the value from 1/2, 2/3, 3/4, 5/6, 7/8 and Auto.
Select network search.
1. Press the button to select Yes or No. If you select " Yes "
you can find more transponders using the home network.
As it refers to NIT during searching, if there is the frequency
information of other transponder, it searches the other
transponder besides the transponder that the user inputs.
Frequency
Polarisation
Symbol Rate
FEC (Forward Error Correction)
Network Search
PVR-8000 ENG 1/21/03 11:10 PM Page 39