Humax PVR-8000 - Manual (Page 9)

GB7
STB Connections
There are several ways of connecting the STB to your existing Audio/TV system.
We recommend using one of the following set-up for best results:
• To TV only(with scart cable)
1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB
and the other end to a SCART socket on your TV.
2. Connect the coaxial cable from the LNB to the LNB IN socket on the STB.
• To TV with VCR
1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB
and the other end to a SCART socket on your TV.
2. Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB
and the other end to a SCART socket on your VCR.
3. Connect the coaxial cable from the LNB to the LNB IN socket on the STB.
• To a Hi-Fi System
1. Connect an RCA/Cinch stereo cable from the AUDIO L,R sockets on the back of
the STB to the LINE, AUX, SPARE OR EXTRA input sockets on your Hi-Fi system.
Connecting TV, VCR and Hi-Fi System
PVR-8000 ENG 1/21/03 11:10 PM Page 12