FARGO electronic 76503 - Manual (Page 21)

DO NOT REVERSE THE RIBBON. DAMAGE
MAY OCCUR TO THE THERMAL PRINT HEAD!
3.
Place the supply
end of the ribbon into
the supply end of the
Ribbon Cartridge (the
side with the cartridge
cover). Make certain
that the ribbon is fed
from underneath the
supply end of the
ribbon roll, up and
over
the top of the
take-up end of the
ribbon roll.
IMPORTANT!
4. After the ribbon
has been installed into
the Ribbon Cartridge,
close the Ribbon
Cartridge Cover. You
are now ready to place
it back into the printer.
19