FARGO electronic 76503 - Manual (Page 44)

Quick Start
If you want to start
using your color
printer right away,
follow this quick start
guide. If you are
unsure of any of the
procedures, refer to the
detailed instructions on
the following pages.
1.
Connect your PrimeraPro to your AppleTalk
Network or directly to the Printer port (not the
modem port) on your Macintosh.
2.
Install the FARGO driver.
3. Use the Chooser to select the driver you have
just installed.
4. Select Page Setup from the File menu to select
the appropriate printer setup choices. The print
quality should be set to 300 x 300 for most printing
applications.
5.
Select Print from the File menu to print your
document. Make Sure you select the Print: Now
option until you are familiar with the FARGO
Backgrounder (refer to Section 8 of this guide for
Backgrounder information).
42
Installation
Insert the driver disk (disk #1 if driver is on
multiple disks) into the disk drive of your
Macintosh. When the disk icon appears on your
desktop, double-click on the disk icon to open the
B. Installing the
FARGO Driver