FARGO electronic 76503 - Manual (Page 40)

38
your image for printing, or if you are using some
other third party color matching software.
Select Algebraic if you would like the printer
driver to make very simple, yet fast, color balance
adjustments. This option gives you more natural
looking images without actually utilizing any
specific color matching software and without
slowing down the processing speed of the printer
driver.
Select FargoColor to enable color matching profiles
written specifically for your printer. This option
automatically adjusts the color of your image
according to preconfigured printer profiles and
default system profiles. This results in a very
precise color match compliant with ICC standards.
(NOTE: Since the FargoColor option is intended to
match color hues as closely as possible, you may
notice that some colors may appear slightly muted
when printing simple spot colors.)
Since the default system profiles provided are
generic, the colors of some monitors may still vary
slightly from your output. As a solution, raw
printer profiles are included with this upgrade in
case you would like to combine your custom
monitor profiles with the printer profiles. This is
done using ColorSynergyª software by Candela
¨ ,
Ltd. This program can also be used to create your
own custom printer profiles. For more information
on ColorSynergy, contact FARGO.
Intensity This control sets the lightness/darkness of the
printed image. Place your mouse pointer on the
box or on the left and right arrows to change the
amount of heat used in the printing process.
K Panel Text
Mode Select this option if you wish to print all gray scale
text with the ribbonÕs black panel only. Normally,
when printing gray scale or black text, PrimeraPro
lays down all four of the ribbonÕs color panels. By
laying down only the black panel, PrimeraPro is
able to print black text with more sharpness and
definition. Processing time may slightly increase
when this option is selected. Please note that some
applications may not support this option.
Write Direct to
Port Selecting this option allows PrimeraProÕs printer
driver to bypass Print Manager and to send all
print data directly to PrimeraPro. When selected,
this option devotes all of your system resources to
the current print job, thus, increasing print speed.
When the print job is finished, your system