FARGO electronic 76503 - Manual (Page 24)

E. Installing and
Adjusting Paper
Trays
PrimeraPro has two
paper trays. The
bottom tray (Paper
Supply Tray) is for
storing paper before
printing. The
removable top tray
(Paper Output Tray)
catches paper after
printing.
1.
Gently pull the
Paper Supply Tray
Door open and lower it
until it is almost level.
2. Pull out the Paper
Supply Tray until it is
fully extended.
3. Locate the Paper
Output Tray. Two
mounting posts are on
the front side edges of
the tray. Place one post
into the mounting hole
located on either side
of the front interior of
the printer.
Please contact your local dealer or FARGO for
current ribbon, paper, and transparency film
selection and pricing.
22