FARGO electronic 76503 - Manual (Page 72)

70
4.
If any ink is visible on the drive roller, clean it
according to the steps in H, below.
H. Cleaning the
Drive Roller
Periodically, you
should clean the
printerÕs drive roller.
This helps to prevent
jams and maintain
uninterrupted service.
Also perform this
procedure if you notice
any ink on the Drive
Roller. Use the
following steps:
1.
Remove the Ribbon
Cartridge.
2. Locate the Drive
Roller. It is a long, black
rubber roller directly
underneath the print
head when the printerÕs
cover is closed.
3. Lightly moisten a
clean, lint-free cloth
with isopropyl alcohol.
4. Wipe the roller
thoroughly. You can use
the On Line and Power
buttons to move the
roller back and forth
while you are wiping
the surface clean.
5.
After the roller is
clean, replace the
Ribbon Cartridge and
close the printerÕs
cover.
Wipe
Drive
Roller
Rotate