FARGO electronic 76503 - Manual (Page 31)

B. Running the
Self Test
A self test can now be
performed to check for
proper operation of the
printer. The self test
should be conducted
only with the wax
thermal transfer
supplies installed in
your printer.
PrimeraPro does not
have a self test feature
available for use with
the dye-sublimation
supplies. A sample of
the wax thermal
transfer Self Test print
out is on the next page.
1.
If power is on, turn
it off now. The Power
light should be off.
Verify that a ribbon is
installed and print
media is loaded.
2.
Press and hold the
On Line switch.
3. While holding the
On Line switch down,
press the Power switch.
29