FARGO electronic 76503 - Manual (Page 38)

Once the printer driver has been successfully
installed, you will need to set the driver up for the
type of paper and ribbon used. There are also
several additional options that can be selected. Use
the following steps to initially set up the driver and
to make changes later on:
Some applications allow you to change these same
printer driver options from their ÒPrintÓ and/or
ÒPrinter SetupÓ screens. This means that you donÕt have
to go back to Control Panel each time you want to
change a setting or option in PrimeraProÕs printer
driver. These applications will usually give you the same
choices and options, but in a slightly altered format.
36
3. The FARGO
PrimeraPro Color
Printer on LPT1 screen
appears. Change the
options as follows:
C. Using
PrimeraProÕs
Windows 3.1
Printer Driver
1. Go back to the
Control Panel and the
Printers group using
steps 1 and 2 on
page 33.
2. Select the Setup
button.
NOTE