Frymaster FPH1721 - Manual (Page 23)

EH1721 SERIES ELECTRIC FRYERS
CHAPTER 4: BUILT-IN FILTRATION
4-4
4.3.1 Pan Preparation (cont.)
3. Remove the crumb screen, hold-down ring
and filter paper from pan. Lift the support
grid, remove and set aside. Clean all
components in hot, soapy water and dry
thoroughly. Clean the pan and sump,
ensuring the air hole in the pickup (suction)
tube is clear of debris.
4. Replace the support grid in pan bottom,
ensuring both the grid and filter pan is free of
water.
5. Place the filter paper over top of pan.
Clean the pan thoroughly after removing crumb
screen, hold-down ring, filter paper and support
grid. Ensure the air hole in the suction tube is free
of debris (arrow).
Cleaned support grid in place.
Place the filter paper over the top of filter pan, and
then seat the paper with the hold-down ring.