Frymaster 8196339 - Manual (Page 35)

4-12
4.10 CM7 Common Tasks
Covered in this section are common tasks used in stores:
1. Escaping out of a menu or sub-menu.
2. Adding new product items.
3. Storing menu items in product buttons.
4. Temperature conversion from F to C.
4.10.1 Escape Menu Items
To escape from MENUS or SUB-MENUS, press the
8
(2) button (Figure
27).
Figure 27
4.10.2 Adding New Product Items to the Menu
To add a new product to the menu:
1. With the computer OFF, enter Program mode by pressing the
UNLOCK button once (see Figure 28).
Figure 28
The computer displays PROGRAM.
2. With the desired selection displayed, press the 9 (1) button (see Figure
29).
Figure 29
The computer displays ENTER Code and sounds an audible alert.
3. Enter 1650 (see Figure 30). 1 6 5
0
( 1650)
Figure 30
The computer displays program MODE changing to SETPOINT TEMPERATURE.
4. Press the
9
(1) button to continue (see Figure 31).
Figure 31
Computer displays TEMP on the left and a temperature on the right.
5. Enter the desired cooking temperature using the
number buttons 0-9 (see Figure 32).
Figure 32