Frymaster 8196339 - Manual (Page 49)

5-5
4. Replace the Magnasol filter assembly in the filter pan, ensuring that the fitting on the bottom of
the assembly is securely seated in the port in the bottom of the pan. Sprinkle one packet of the
Magnasol XL filter powder evenly over the screen.
5. Replace the crumb tray, then push the filter pan back into the fryer, positioning it all the way to
the back of the cabinet.
5.3
Operation of the Filter
After a preset amount of cook cycles the computer will automatically display FLTR NOW
alternating with YES NO.
1. Press the 9 (1) button to continue (see Figure 8).
The computer displays CNFM FLTR alternating with YES NO.
Figure 8
2. Press the 9 (1) button to continue (see Figure 9).
Figure 9
DANGER
Draining and filtering of cooking oil must be accomplished with care to avoid the
possibility of a serious burn caused by careless handling. The oil to be filtered is at
or near 350°F (177°C). Ensure drain handles are in their proper position before
operating any switches or valves. Wear all appropriate safety equipment when
draining and filtering cooking oil.
DANGER
NEVER attempt to drain cooking oil from the fryer with the burners lit! Doing so will
cause irreparable damage to the frypot and may cause a flash fire. Doing so will also
void the Frymaster warranty.
3. Ensure that the filter is prepared. See Sec.
5.2.
4.
Make sure the oil is at operating
temperature.
5. Drain the frypot into the filter pan by
rotating the drain valve handle 90º (see
Figure 10). If necessary, use the Fryer's
Friend clean-out rod to clear the drain
from inside the frypot.
Figure 10
DANGER
Do not drain more than one frypot at a time into the built-in filtration unit to avoid
overflow and spillage of hot oil that may cause severe burns, slipping and falling.
Open drain valve by
rotating 90º.