Frymaster H14 Series - Manual (Page 39)

5-11
d. To clean the filter base assembly, use a sponge or cloth soaked with a water and grease-
cutting solution. Be careful not to get water on the pump/motor assembly.
e. Wipe filter-base assembly dry with a clean, dry cloth or paper-towel.
CAUTION
All water
MUST MUST MUST MUST be removed from the suction tube before inserting filter pan.
f. Wipe the inside and outside of the tube with clean, dry cloths or paper towels.
g. Insert filter pan into the filter base assembly.
NOTE: To drain old oil or boil-out solution, drain in an appropriate container. DO NOT DRAIN
WATER IN THE FILTER PAN.
WARNING
The filter pan
MUST MUST MUST MUST never be used to dispose of, or transport spent-cooking
oil/shortening to the disposal area. Cooking oil /shortening
MUST MUST MUST MUST always be
allowed to cool below 100°F (38°C) before transporting to the disposal area. A
shortening disposal unit (MSDU) is available and highly recommended for safety.