Frymaster Gas Rethermalizers FBKR18 Series - Manual (Page 15)

3-1
FBCR18 & FBKR18 SERIES GAS RETHERMALIZERS
CHAPTER 3: OPERATING INSTRUCTIONS
3.1 Introduction
WARNING
The on-site supervisor is responsible for ensuring that operators are made aware of
the inherent hazards of operating a gas-fired heated water system, particularly the
aspects of draining and cleaning procedures.
Mechanically, the FBCR18 and FBKR18 rethermalizers are virtually identical. The FBKR18 units
have a manual fill switch in addition to the AutoFill feature.
The primary difference between the two rethermalizers is the controller. Both units use modified
Computer Magic III (CM III) computers. Although the computers are very similar in appearance
(and to standard CM III computers), they are not interchangeable.
3.2 FBCR18 Series Computer
This computer has 12 programmable product buttons and a “chill” switch. The chill switch shuts
off the burners, but does not turn off the computer. This allows unused product to be quickly
cooled before being returned to a refrigerator or freezer.
The product buttons are multi-functional. In the programming mode, each button can be
programmed for a distinct rethermalizing time. In the rethermalizing mode, pressing a button
initiates a specific timed countdown.
1 1 3 2 4
5 5 6
1 LED Displays 4 Power Switch
2 Chill Switch 5 Product Buttons
3 Temperature Check/Program Lock 6 Program Mode Switch
FBCR18 Series Computer