Frymaster Gas Rethermalizers FBKR18 Series User Manual

Page 20

Advertising
background image

3-6

Remember: Stir time 2 must be greater than stir time 1 (or else be “0”). Stir time 3
must be greater than stir time 2 (or else be “0”). None of the stir times should be
greater than the rethermalizing time entered in Step 6. If a stir time exceeds the
rethermalizing time, the stir alarm will not sound.

8. SELP (Select Product) again appears in the left display. Return to Step 5 and follow all

instructions to program more products.

9. Lock in the programming by pressing the Temperature Check/Program Lock Switch .

O

PERATING THE

FBKR18 S

ERIES

R

ETHERMALIZER


Turn the computer on by pressing the Power switch. NOTE: A decimal between digits 1 and 2
in either LED Display indicates that the element is energized.

1. One of the following is displayed:

a. °-Lo, indicates the cookpot temperature is 11ºF (6ºC) lower than the setpoint.

b. °-HI, indicates the cookpot temperature is 11ºF (6ºC) higher than the setpoint.

c.

- - - -

(four dashes), indicates the cookpot temperature is in the rethermalizing range.

d. HELP, indicates a heating problem.

e. Prob, indicates a problem with the computer temperature probe circuit.


2. Press a product button to initiate a rethermalizing cycle.

a. The programmed rethermalizing time appears and the timer countdown will begin.

b. Stir alarms, if programmed, will sound, the display will read Stir, and the LED in the

product button will blink. Press the indicated product button to cancel the alarms.

CAUTION

Pressing the product button twice while the alarm is active will cancel the
rethermalizing cycle as well as the alarm.

c. An alarm sounds at the end of the cycle. COOC is displayed, and the associated product

button flashes. To cancel the alarm, press the flashing button.


3. Press the Temperature Check switch once to check the cookpot temperature. Press the switch

twice to check the setpoint.

4. During idle periods, four dashes (

- - - -

) should appear in both displays, indicating that the

cookpot is at setpoint.

FBKR18 T

EMPERATURE

D

ISPLAY

O

PTIONS

Advertising
This manual is related to the following products: