Editing a program title, Vr800 owner’s manual (handling programs), Press the setup key while the vr800 is stopped – Fostex VR800 User Manual
Page 35: Press the execute/yes key, Optical
35
VR800 Owner’s Manual (Handling Programs)
SHIFT
P.EDIT
LOC MEM
RECORD
STOP
PLAY
REW
F FWD
AUTO PUNCH
CLIPBOARD
AUTO RTN
OUT
IN
END
OUT
IN
START
EJECT
ACCESS
5
6
7
8
OL
24
12
6
0
1
2
3
4
RECORD TRACK
4
3
2
1
5
6
7
8
EXECUTE
/ YES
EXIT
/ NO
DISP SEL
UNDO / REDO
EDIT
HOLD/
STORE
SETUP
JOG
VARI PITCH
SCRUB
LOCATE
AUTO PLAY
PGM SEL
AUTO RTN
TIME BASE SEL
SHUTTLE
LOCATE REC END
LOCATE ABS 0
CLIPBOARD PLAY
PUNCH
AUTO
OPTICAL
A SYNC
PREVIEW
1
2, 4
3, 5
4
4
Editing a Program title
You can name the program as explained in the “Creating a new program” section. You can also change the title
later by using the [Title Edit ?] menu in SETUP mode.
Note:
You can edit the title of the selected program before you
select SETUP mode. You cannot select a program after the VR800
enters SETUP mode. Be sure to select the desired program using
the steps explained in the “Using the program change function”
section.
1. Press the SETUP key while the VR800 is stopped.
The VR800 will enter the SETUP mode and display the
first hierarchy level of the SETUP menu that was selected
before you turned off the power.
2. Turn the JOG dial to select the first hierarchy level
of the [Title Edit ?] menu.
The symbols [t] and [?] will flash alternately.
The currently-selected program number will also appears.
You can also use the HOLD/> key, the REWIND button, or
the F FWD button to select the first hierarchy level
display.
3. Press the EXECUTE/YES key.
The currently-selected program title will appear with the
left-most character flashing.
4. Press the HOLD/> key, the REWIND button, or the
F FWD button to move the flashing cursor, and use
the JOG dial to enter characters or numbers.
To move the flashing cursor, press the HOLD/> key, the
REWIND button, or the F FWD button. The F FWD button
is the most convenient.
You can enter up to 16 characters, nine of which will
appear on the display.
You may enter the following characters and numbers:
5. After you enter the title, press the EXECUTE/YES
key.
The new title will be confirmed, and the ABS time value
of the program will appears.
4
6
SETUP
DRIVE
AUTO
A.PUNCH
SYNC OUT
CLK
SCSI
44.1kHz
DIGITAL
44.1kHz
SETUP
DRIVE
AUTO
A.PUNCH
SYNC OUT
CLK
SCSI
PGM
DIGITAL
44.1kHz
SETUP
DRIVE
AUTO
A.PUNCH
SYNC OUT
CLK
SCSI
DIGITAL