Auto repeat, Hint – Fostex VR800 User Manual

Page 56

Advertising
background image

VR800 Owner’s Manual (Locate Function)

56

1. Store the AUTO RTN START and AUTO RTN END

points.

Refer to the chapter “Storing a Locate Point (Edit Point)”
on page 48 for information on storing the desired points
in the AUTO RTN START key and the AUTO RTN END
key.

2. Press the AUTO RTN/AUTO PLAY key to turn on

the [PLAY] and [RTN] indicator on the bottom of
the display.

3. Start playback a little before the AUTO RTN START

point.

The VR800 operates as shown in the diagram, and stops
at the AUTO RTN START point.

• You can set a preroll time in the [Preroll Time?] menu in

SETUP mode so that the VR800 will start playback preroll

time before the locate point. You can set the preroll time

from 0 to 10 seconds. Refer to the chapter “Changing the

Initial Settings (SETUP Mode)” on page 94.

<Hint>

You can make repeated Auto Punch In/Out rehearsal much easier and quicker by using the Auto Repeat function.

Set the AUTO RTN START point prior to the AUTO PUNCH IN point, and set the AUTO RTN END point after the AUTO

PUNCH OUT point. The recorder will repeat the operation automatically so you can concentrate on your rehearsal.

Cancel Auto Repeat mode before you record a take.

The VR800 will play this range repeatedly for rehearsal, which makes it easy for you to check the recording level and practice

your performance.

<Operation of the Auto Repeat mode.>

AUTO RTN END point

AUTO RTN START point

LOCATE

PLAYBACK
START

PLAYBACK

AUTO RTN END point

AUTO RTN START point

PLAYBACK
START

AUTO PUNCH IN point

AUTO PUNCH OUT point

Rehearsal range

PLAYBACK

LOCATE

Auto Repeat

The Auto Repeat function allows the VR800 to repeat playback up to the AUTO RTN END point, automatically
locate the AUTO RTN START point, then play up to the AUTO RTN END point until you cancel the function by
pressing the STOP button. To enable this function, both AUTO PLAY mode and AUTO RTN mode should be
turned on, and the AUTO RTN START point and the AUTO RTN END point should already be set.
Using this function will facilitate the Auto Punch In/Out and Manual Punch In/Out rehearsal. See “Hint”
after the following section.

RTN

AUTO

PLAY

Lights up

Advertising