FMI PFS P324E - Manual (Page 24)

www.fmiproducts.com 108794-01G 24
trouBlesHootING
Continued
OBSERVED PROBLEM
Dark residue on logs or inside
of fireplace
POSSIBLE CAUSE
1. Improper log placement
2. Air holes at burner inlet
blocked
3. B u r n e r f l a m e h o l e s
blocked
4. Improper venting or exces-
sive blockage
5. Excessive amounts of
embers and pan material
REMEDY
1. Properly locate logs
2. Clean out air holes at burn-
er inlets. Periodically repeat
as needed
3. Remove blockage or re-
place burner
4. Have the vent system in-
spected, including the ter-
mination cap. Remove any
restrictions or obstruction
5. Clear excess embers until
a minimum gap of 1/2"
remains under the grate