Force10 Networks Force10 TeraScale E-Series E1200i - Manual (Page 80)

80 System Boot
To configure the chassis from the BOOT_USER prompt:
Step Command Task
1.
help
or
?
• The
BOOT_USER #
prompt appears after an autoboot interrup-
tion. This is the default boot prompt, not the CLI prompt.
• Enter help or ? to display a list of available commands and
syntax.
• Enter syntax help to display syntax information and variable
descriptions.
• On some display output, you are given the option to continue
the help screen display
<cr> or to stop <q> .
• You can abbreviate the boot commands by entering only the
first letter of a command word. A matching algorithm dis-
plays the commands starting with the letter or letters you
entered. For example,
b displays the commands starting with
the letter b, boot change and boot selector . Entering s h
displays the syntax help information.
• All commands are case insensitive.