FUJITSU SPARC T5440 - Manual (Page 109)

Servicing Customer-Replaceable Units 83
▼ Remove a Fan Tray
If you are removing the fan trays as a prerequisite for another service procedure,
follow the steps in this procedure.
Before you begin, complete these tasks:
■ Read the section, “Safety Information” on page 59 .
■ Power off the server, using one of the methods described in the section, “Powering
Off the System” on page 63 .
■ Perform the task, “Extend the Server to the Maintenance Position” on page 66
■ Perform the task, “Perform Electrostatic Discharge – Antistatic Prevention
Measures” on page 69
Do the following :
● Press the fan tray latches toward the center of the fan tray and pull the fan tray
up and out of the system.
FIGURE: Removing a Fan Tray