Useful sunvts tests, Related information, Detecting faults using post – FUJITSU SPARC T5440 User Manual

Page 68

Advertising
background image

42

SPARC Enterprise T5440 Server Service Manual • July 2009

Useful SunVTS Tests

TABLE: Useful SunVTS Tests on page 42

describes the SunVTS tests which are useful

for diagnosing issues with the SPARC Enterprise T5440 server.

Related Information

■

“Diagnostic Flowchart” on page 11

■

“SunVTS Software Packages” on page 41

■

SPARC Enterprise T5440 Server Installation and Setup Guide

■

SPARC Enterprise T5440 Server Administration Guide

Detecting Faults Using POST

Run POST in maximum mode to detect system faults. See

“Run POST in Maximum

Mode” on page 28

.

POST error messages use the following syntax:

c:s > ERROR: TEST = failing-test
c:s > H/W under test = FRU
c
:s > Repair Instructions: Replace items in order listed by H/W under
test above

c:s > MSG = test-error-message
c
:s > END_ERROR

In this syntax, c = the core number, s = the strand number.

Warning and informational messages use the following syntax:

TABLE:

Useful SunVTS Tests

SunVTS Tests

FRUs Exercised by Tests

Memory Test

FB-DIMMs

Processor Test

CMP, motherboard

Disk Test

Disks, cables, disk backplane, DVD drive

Network Test

Network interface, network cable, CMP,
motherboard

Interconnect Test

Board ASICs and interconnects

IO Ports Test

I/O (serial port interface), USB subsystem

Environmental Test

Motherboard and service processor

Advertising