FUJITSU SPARC T5440 - Manual (Page 119)

Servicing Customer-Replaceable Units 93
■ “PCIe Slot Configuration Guidelines” on page 97
■ “Performing Node Reconfiguration” on page 155
▼ Remove a PCIe Card
Before you begin, complete these tasks:
■ Read the section, “Safety Information” on page 59 .
■ Power off the server, using one of the methods described in the section, “Powering
Off the System” on page 63 .
■ “Extend the Server to the Maintenance Position” on page 66
■ “Perform Electrostatic Discharge – Antistatic Prevention Measures” on page 69
■ “Remove the Top Cover” on page 69
Do the following :
1. Identify the PCIe card you want to remove.
2. Open the PCIe card latch.
FIGURE: Removing a PCIe Card
3. Remove the PCIe card the system.
4. Place the PCIe card on an antistatic mat.
5. If you are not replacing the PCIe card, install a PCIe filler panel in its place.
6. Close the PCIe card latch.