FUJITSU SPARC T5440 - Manual (Page 83)

Managing Faults 57
Related Information
■ “Diagnostic Flowchart” on page 11
■ “Detecting Faults Using LEDs” on page 30
■ “ILOM-to-ALOM CMT Command Reference” on page 53
■ SPARC Enterprise T5440 Server Administration Guide
■ Integrated Lights Out Manager 3.0 Supplement for SPARC Enterprise T5440 Server
diag_trigger power-on-reset
error-reset
None all-resets all-resets
diag_verbosity normal N/a max max
Description of POST
execution This is the default POST
configuration. This
configuration tests the
system thoroughly, and
suppresses some of the
detailed POST output. POST does not
run, resulting in
quick system
initialization. This
is not a suggested
configuration. POST runs the full
spectrum of tests
with the maximum
output displayed. POST runs the full
spectrum of tests
with the maximum
output displayed.
TABLE: ALOM CMT Parameters and POST Modes
Parameter
Normal Diagnostic Mode
(Default Settings)
No POST Execution
Diagnostic Service
Mode Keyswitch Diagnostic
Preset Values