FUJITSU SPARC T5440 - Manual (Page 155)

Servicing Field-Replaceable Units 129
Servicing the Fan Tray Carriage
You must remove the fan tray carriage in order to service the following components:
■ Hard disk backplane
■ Motherboard
■ Front control panel
■ Front I/O board
Related Information
■ “Servicing Fan Trays” on page 81
■ “Servicing the Hard Drive Backplane” on page 132
■ “Servicing the Motherboard” on page 135
■ “Servicing the Front Control Panel” on page 144
■ “Servicing the Front I/O Board” on page 146
▼ Remove the Fan Tray Carriage
Before you begin, complete these tasks:
■ Read the section, “Safety Information” on page 59 .
■ Power off the server using one of the methods described in the section, “Powering
Off the System” on page 63 .
■ “Extend the Server to the Maintenance Position” on page 66
■ “Perform Electrostatic Discharge – Antistatic Prevention Measures” on page 69
■ “Remove a Fan Tray” on page 83
Note – You must remove all four fan trays.
■ “Remove the Top Cover” on page 69
■ “Remove a CMP/Memory Module” on page 99
Note – You must remove all CPU modules and memory modules from the system.
Do the following: