FUJITSU SPARC T5440 - Manual (Page 88)

62 SPARC Enterprise T5440 Server Service Manual • July 2009
Required Tools
The SPARC Enterprise T5440 server can be serviced with the following tools:
■ Antistatic wrist strap
■ Antistatic mat
■ No. 1 Phillips screwdriver
■ No. 2 Phillips screwdriver
■ 7 mm hex driver
■ No. 1 flat-blade screwdriver (battery removal)
■ Pen or pencil (power on server)
▼ Obtain the Chassis Serial Number
To obtain support for your system, you need your chassis serial number.
● The chassis serial number is located on a sticker that is on the front of the
server and another sticker on the side of the server.
▼ Obtain the Chassis Serial Number
Remotely
● Use the ILOM show /SYS command to obtain the chassis serial number.
-> show /SYS
/SYS
Targets:
SERVICE
LOCATE
ACT
PS_FAULT
TEMP_FAULT