FUJITSU SPARC T5440 - Manual (Page 9)

Contents vii
▼ Detect Faults Identified by the Solaris PSH Facility Using the ILOM
fmdump Command 45
Clearing Faults 47
▼ Clear Faults Detected During POST 48
▼ Clear Faults Detected by PSH 49
▼ Clear Faults Detected in the External I/O Expansion Unit 50
Disabling Faulty Components 50
▼ Disable System Components 52
▼ Re-Enable System Components 52
ILOM-to-ALOM CMT Command Reference 53
Preparing to Service the System 59
Safety Information 59
Safety Symbols 60
Electrostatic Discharge Safety Measures 61
Antistatic Wrist Strap 61
Antistatic Mat 61
Required Tools 62
▼ Obtain the Chassis Serial Number 62
▼ Obtain the Chassis Serial Number Remotely 62
Powering Off the System 63
▼ Power Off From the Command Line 64
▼ Power Off – Graceful Shutdown 64
▼ Power Off – Emergency Shutdown 65
▼ Disconnect Power Cords From the Server 65
Extending the Server to the Maintenance Position 65
▼ Extend the Server to the Maintenance Position 66
Removing the Server From the Rack 67
▼ Remove the Server From the Rack 67