Install a pcie card, Next steps, Add a pcie card – FUJITSU SPARC T5440 User Manual

Page 120

Advertising
background image

94

SPARC Enterprise T5440 Server Service Manual • July 2009

▼ Install a PCIe Card

1. Identify the correct slot for installation.

2. Open the PCIe card latch.

FIGURE:

Installing a PCIe Card

3. Insert the PCIe card into its slot.

4. Close the PCIe card latch.

Next Steps

■

“Install the Top Cover” on page 150

■

“Slide the Server Into the Rack” on page 151

■

“Power On the Server” on page 153

▼ Add a PCIe Card

Before you begin, complete these tasks:

■

Read the section,

“Safety Information” on page 59

.

■

Power off the server, using one of the methods described in the section,

“Powering

Off the System” on page 63

.

■

“Disconnect Power Cords From the Server” on page 65

■

“Extend the Server to the Maintenance Position” on page 66

Advertising