Related information, Servicing pcie cards – FUJITSU SPARC T5440 User Manual

Page 118

Advertising
background image

92

SPARC Enterprise T5440 Server Service Manual • July 2009

The following LEDs are lit when a power supply fault is detected:

■

Front and rear Service Required LEDs

■

Rear PS Failure LED on the bezel of the server

■

Fault LED mode on the faulty power supply

The front and rear panel Service Required LEDs are also lit if the system detects a
power supply fault.

See

“Front Panel LEDs” on page 4

and

“Rear Panel LEDs” on page 7

for more

information about identifying and interpreting system LEDs.

See

“Power Supply LED” on page 91

for specific information about power supply

status LEDs.

Related Information

■

“Managing Faults” on page 9

■

“Hot-Pluggable and Hot-Swappable Devices” on page 72

■

“Front Panel LEDs” on page 4

■

“Rear Panel LEDs” on page 7

Servicing PCIe Cards

Up to eight low-profile PCIe cards may be installed in the system. All slots are wired
to x8 PCIe lanes. Slot 1 and Slot 7 support graphics cards with x16 connectors. Slot 4
and Slot 5 also support 10-Gbyte Ethernet cards (XAUI cards). When a XAUI card is
installed, a PCIe card cannot be installed in the same slot.

Related Information

■

“PCIe Device Identifiers” on page 96

Green

AC present/system
powered on

System is powered on.

Blinking amber

Fault

Voltage overcurrent or other power fault.

Amber

Fault

Internal power supply failure or power supply
fan failure.

TABLE:

Power Supply Status LEDs (Continued) (Continued)

LED State

Meaning

Notes

Advertising