GE DSR-1000eZ - Manual (Page 24)

Calibur DSR-1000eZ 3-2 0150-0238A
Entering the Main menu
Enter the Main menu by pressing the Menu button. The Main menu will
appear on the primary monitor.
ENTER
MENU
Menu button
The Main Menu
Time/Date
Alarms
Timer Settings
Record Settings
Display Settings
Archive Setup
Advanced Menu
The Main menu provides access to all of the operator programmable
options. Each sub-section of the Main menu is described briefly in this
section.
For complete information about operator programming in the Main menu,
see section 4.
About DSR-1000eZ
o Main Menu
→ Time/Date
Set Time Format
Set Date Format
Set Time
Set Date
Use this menu to specify:
•
The time format: 12 or 24 hours.
•
The date format: MM/DD/YY, DD/MM/YY, or YY/MM/DD.
•
The time.
•
The date.
o Main Menu
→ Alarms
Alarms Menu
Hardwire Alarm : Enable
Teletext Alarm : Disable
Alarm Buzzer : Enable
[CANCEL] [OK]
Use this menu to specify:
•
Whether an alarm condition will be activated when the
unit detects a signal on the Alarm In connection.
•
Whether a teletext alarm signal (generated by a
multiplexer or other device) will cause the unit to
activate an alarm condition.
•
Whether the internal buzzer is activated during an
alarm condition.