GE DSR-1000eZ - Manual (Page 33)

0150-0238A 4-3 Calibur DSR-1000eZ
This teletext alarm detecting feature of the DSR-1000eZ is compatible with the following styles of
Multiplexers:
•
Kalatel
•
Philips
•
Robot
•
Pelco
•
Sanyo
•
Philips REO
•
ATV
•
ATV QSP
•
Vista VLM
•
QSI 1700
•
Diebold
Connecting to Dedicated Micros (DM)
When connecting to a Dedicated Micros multiplexer:
•
It is necessary to connect the alarm output of the Mux to the alarm input of the DSR-1000eZ (as
you would do when connecting the alarm input on standard time-lapse VCR).
•
It is necessary to configure the Main Menu
→ Alarms → Hardwire Alarm as Enabled.
•
It is necessary to configure the Main Menu
→ Alarms → Teletext Alarm as Disable.
Alarm Menu
Hardwire Alarm : Enable
Teletext Alarm : Disable
Alarm Buzzer : Enable
[CANCEL] [OK]
To configure the alarm settings:
1. Use the Shuttle to navigate among the fields.
2. Use the Jog to change the values of the highlighted
fields.
3. To Save the changes and Exit the menu: Use the
Jog to select [OK], then press the Enter button.
--OR--
4. To Exit the menu without making changes: Use the
Jog to select [CANCEL], then press the Enter button.
4.3 Main Menu
→ Timer Settings
DATE START STOP SPD(pps) QUALITY ON/OFF
31
Sat
Mon-Fri
Sat-Sun
Mon-Sun
--
16:45
07:55
09:56
14:23
02:23
--:--
17:05
08:10
11:05
14:50
03:34
--:--
20
10
60
60
20
--
[OK]
High
Med
Low
High
Med
--
On
Off
On
On
Off
--
This menu allows the user to
program a timed-recorded
event. Use this menu to
specify:
•
The date, or days on
which the recording
will occur.
•
The start and stop
time.
•
The record speed.
•
The record quality.
•
Whether the event is
enabled.
EDIT Mode Hit "ENTER" To Toggle EDIT Mode