GE DSR-1000eZ - Manual (Page 25)

0150-0238A 3-3 Calibur DSR-1000eZ
o Main Menu
→ Timer Settings
DAY START STOP SPD(pps) QUALITY ON/OFF
31
SAT
MON-FRI
SAT-SUN
MON-SUN
--
16:45
07:55
09:56
14:23
02:23
--:--
17:05
08:10
11:05
14:50
03:34
--:--
20
10
60
60
20
--
[OK]
High
Med
Low
High
Med
--
On
Off
On
On
Off
--
This menu allows the user to
program a timed-recorded
event. Use this menu to
specify:
•
The date, or days on
which the recording
will occur.
•
The start and stop
time.
•
The record speed.
•
The record quality.
•
Whether the event is
enabled.
EDIT Mode Hit "ENTER" To Toggle EDIT Mode
o Main Menu
→ Record Settings
Normal Record Speed
Alarm Record Speed
Video Quality
Use this menu to specify:
•
The record speed during Normal recording.
•
The record speed when the unit detects an alarm condition.
•
The recorded picture quality.
o Main Menu
→ Display Settings
Current Time / Date
Record Capacity
Archive Status
Last Alarm
Record/Playback Speed
Playback Time / Date
Use this menu to specify what status information will be displayed on
the primary monitor. Select On or Off, for the following items.
•
The current time and date.
•
The remaining amount of time before the hard disk runs
out of record space.
•
The Archive Status.
•
The time and date of the last alarm.
•
The current record/playback speed.
•
During Playback, the time and date the recording was
made.
o Main Menu
→ Archive Setup
Selective archive
Restore from archive
Background archive
Archive Overwrite Mode
Erase Archive Medium
Use this menu to:
•
Select data to be archived and begin archiving process.
•
Restore data from archive device.
•
Enable background archiving.
•
Specify how the unit will handle overwrite issues when the
archive medium becomes full.
•
Erase the archived data.