GE DSR-1000eZ - Manual (Page 9)

0150-0238A 1-3 Calibur DSR-1000eZ
2. Reverse play button: Press this button to playback video in reverse at the normal record speed.
3. Stop button: Press this button to stop Recording or Playback.
4. Play Forward button: Press this button to playback video at the normal record speed.
5. Pause button: Press this button to pause playback.
6. Search button: Press this button to enter the Search Filters menu.
7. Increase and Decrease Record Speed buttons: Press these buttons to increase or decrease
the Record or Playback speed.
8. Combination Menu and Enter button: Press the lower half of the button (the Menu button) to
enter the Menu system. Also used to move to higher level menus while in the menu system.
--OR—
Press the upper half of the button (the Enter button) to make or confirm a selection in the menu
system.
9. Power On Indicator and Alarm Indicator: Indicates power and an alarm indication when their
respective LED’s are lit.
10. Jog / Shuttle: The Jog (the inner of the two dials) is used for single frame advance while in
Pause mode; it is also used to change the value of a parameter while in the menu system. The
Shuttle (the outer of the two dials) is used to Fast Forward and Rewind while in the Play mode.
1.7 Back Panel Connections
Figure 1-3 Back Panel
6
1 2
4 5 3 7
1. I/O Port: For connecting peripheral devices such as alarm devices, alarm relays, or the VEXT
connection.
2. RS-232 Serial Port: Serial port for Flash Upgrading of software. Also for external control of
unit.
3. Ethernet Port (Optional): For viewing Live or Recorded images on a PC via the Ethernet.
4. Power Connector: Connect 12 Volt DC external power supply.
5. SCSI Port: For connecting an SCSI compatible archive device.
6. Audio In (Optional): RCA jack, 315mV, 40k Ohms. Unbalanced.
Audio Out (Optional): RCA jack, 315mV, 600 Ohms. Unbalanced.
7. Video In: Composite video input with BNC style connector.