GE DSR-1000eZ - Manual (Page 48)

Calibur DSR-1000eZ 5-4 0150-0238A
5.4 Advanced Menu
→ Auto Delete Mode
Configuring the unit with the Auto Delete mode from 7 to 99 days prevents the unit from displaying or
archiving any data that is more than the selected number of days old. This feature may be required by
law in some jurisdictions, please consult with the local authorities.
Use the Jog to select from 7-99 Days or OFF.
Press the Enter button to implement the selection.
If the selection is altered from what was previously selected, the confirmation menu will appear.
Rotate the Shuttle to select Yes or NO.
ADM will change. Are you sure?
Message
ADM Setting
30 Days
Yes
5.5 Advanced Menu
→ Communications
Baud Rate
Ethernet Settings
Modem Settings
Use thus menu to specify:
•
The data transfer rate for the RS-232 serial port.
•
The units Ethernet network connection settings (Ethernet units only).
•
The Modem connection settings.
o Advanced Menu
→ Communications → Baud Rate
Use the Jog to select the Baud Rate.
Press the Enter button to confirm the selection and exit the menu.
--OR—
Press the Menu button to exit the menu without making changes.
1200 Baud
2400 Baud
4800 Baud
9600 Baud
19200 Baud
38400 Baud
57600 Baud
o Advanced Menu
→ Communications → Ethernet Settings
An Ethernet session is an active network connection between a PC and the unit, with the user viewing
live camera images or accessing data stored on the hard disk. Only available on ethernet models.
Message When Ethernet is first selected,
this warning box will appear.
Select OK to continue.
Warning – Machine will reset if any values change!
[OK]