GE DSR-1000eZ - Manual (Page 47)

0150-0238A 5-3 Calibur DSR-1000eZ
o Advanced Menu
→ Disk Maintenance → Delete
Deleting Disk…
[CANCEL]
To begin deleting the disk, use the Jog to select DELETE, then press the
Enter button. The Deleting Disk menu will appear. The unit will begin
deleting the oldest recorded information immediately.
To stop the delete process, select [CANCEL] by pressing the Enter
button.
Data that was deleted before [CANCEL] was selected will remain deleted
unless UNDELETE is selected.
o Advanced Menu
→ Disk Maintenance → Undelete
Undeleting Disk… To restore information that was previously deleted, use the Jog to select
UNDELETE
, then press the Enter button.
To stop the restore process, select [CANCEL] by pressing the Enter
button.
[CANCEL]
o Advanced Menu
→ Disk Maintenance → Erase
Caution: Erasing the disk removes recorded data without the possibility of restoring it.
To begin erasing the disk, use the Jog to select ERASE, then press the Enter button. The Erase Disk
Warning box will appear. Select [CANCEL] to return to the previous menu or [OK] to continue.
All data will be permanently erased!
Do You want to continue?
Erase Disk
[CANCEL] [OK]
Erasing Disk…
[CANCEL]
To stop the erasing process, select [CANCEL] by pressing the Enter
button.
Data that was erased before [CANCEL] was selected will remain deleted
permanently.
5.3 Advanced Menu
→Audio Record Setting
OFF
G.711 (64kb/s)
Use this menu to:
•
Select Off and Disable the audio recording capability.
•
Select G.711 and Enable the audio recording capability (Audio units only).