GE DSR-1000eZ - Manual (Page 52)

Calibur DSR-1000eZ 5-8 0150-0238A
5.9 Advanced Menu
→ Factory Settings
Password Box
Please Enter The Factory Password
O ---
Use this menu to enter the Factory Password, and
restore the unit to the factory defaults.
Use the Jog to select a character, then use the
Enter button to complete the selection, and move to
the next character.
Pressing the Enter button on the last character will
complete the password selection and return the unit
to the factory default configuration.
5.10 Advanced Menu
→ Change Password
Password Box
Enter A New Password
O ---
Use this menu to change the Advanced Menu
Password.
Use the Jog to select a character, then use the
Enter button to complete the selection, and move to
the next character.
Pressing the Enter button on the last character will
open the Confirmation Box.
Confirmation Box
Please Re-Enter The Password
O ---
Re-enter the New password.
Pressing the Enter button on the last character will
complete the password selection.
Message
The New Password Has Been Accepted!
[OK]
If the password in the Confirmation Box matches
the password from the Password box, this message
will appear.
Press the Enter button to select [OK] and exit the
menu.
Message
The Password Was Not Changed!
[OK]
If the password in the Confirmation Box does not
match the password from the Password box, this
message will appear.
Press the Enter button to select [OK] and exit the
menu.