GE DSR-1000eZ - Manual (Page 37)

0150-0238A 4-7 Calibur DSR-1000eZ
o Main Menu
→ Display Settings → Record Capacity
OFF
ON
Select ON, to display the amount of time remaining before the hard disk runs out of record
space. The data is displayed near the upper left hand corner of the primary monitor. The unit
displays the Record Capacity with two measures of time, and switches automatically
depending on the amount of time remaining:
•
Days and Hours
•
Hours and Minutes
•
Minutes and Seconds
Use the Jog to select ON or OFF.
Press the Enter button to confirm the selection and exit the menu.
--OR—
Press the Menu button to exit the menu without making changes.
o Main Menu
→ Display Settings → Archive Status
OFF
ON
To display the archive status near the upper center of the screen on the primary monitor,
select ON. The unit will display either:
•
ARCHIVE NOT CONNECTED.
•
ARCHIVE READY.
•
ARCHIVE NOT READY.
Use the Jog to select ON or OFF.
Press the Enter button to confirm the selection and exit the menu.
--OR—
Press the Menu button to exit the menu without making changes.
o Main Menu
→ Display Settings → Last Alarm
OFF
ON
To display the time and date of the last alarm, near the upper right hand corner of the primary
monitor, select On. The unit will display NONE if there is no previous record of an alarm.
Use the Jog to select On or Off.
Press the Enter button to confirm the selection and exit the menu.
--OR—
Press the Menu button to exit the menu without making changes.
o Main Menu
→ Display Settings → Playback Time / Date
OFF
ON
To display the time and date the recording was made (during playback) select On. The data is
displayed near the upper right hand corner of the screen.
Use the Jog to select On or Off.
Press the Enter button to confirm the selection and exit the menu.
--OR—
Press the Menu button to exit the menu without making changes.