GE DSR-1000eZ - Manual (Page 26)

Calibur DSR-1000eZ 3-4 0150-0238A
Main Menu
→ Advanced Menu
Password Box
Please Enter The Password!
0 ---
To access the Advanced menu:
1. Select ADVANCED MENU from the Main menu, then
press the Enter button. The Password Box will
appear.
2. Enter the Advanced menu password. Use the Jog to
select a character, then use the Enter button to
complete the selection, and move to the next
character.
3. Pressing the Enter button on the last character will
complete the password selection and the unit will
display the Advanced menu.
o Main Menu
→ About DSR-1000eZ
Use this menu to display information about the DSR-1000eZ. Select Main Menu
→ About DSR-
1000eZ to display the About DSR-1000eZ screen.
Serial Number:
Software Version:
Software Date:
Software Checksum:
Boot Code Ver.:
Disk Size:
Ethernet Enable:
Ethernet Address:
Hardware Address:
D406-T72F-219019
2.00
Sep 03 16:40:18
41173C6B
1.00
161.99 GB
Enabled
10.90.253.10
BA-BE-C6-7E-FA-CE
2002
[OK]
Ethernet information will not
be displayed unless the DSR-
1000eZ is an ethernet supplied
model.
The Advanced Menu
Disk Overwrite Mode
Disk Maintenance
Audio Record Setting
Auto Delete Mode
Communications
Multiplexer Format
For security reasons, a password is provided to limit access to the
Advanced menu. For instructions about entering the Advanced menu,
see Main Menu
→ Advanced Menu, on the previous page.
The Advanced menu provides access to all of the installer
programmable options. Each sub-section of the Advanced menu is
described briefly in this section.
For complete information about installer programming in the Advanced
menu, see section 5.
Adjust Picture
Front Panel Lock
Factory Settings
Change Password
Firmware Upgrade