Gateway DVD Player - Manual (Page 32)

26 www.gateway.com
Configuring MP3 audio
This option sets the outgoing digital audio format of MP3 tracks.
To set your MP3 output format:
1
On the player’s remote control, press STOP , then press SETUP . The Welcome to Setup
screen opens.
2
Use your remote control’s arrow buttons to highlight Digital , then press ENTER . The
Digital audio setup menu appears.
3
Highlight MP3 , then press the buttons to select:
■ Bitstream
Outputs raw MP3 digital signals from the optical or coaxial digital audio jacks.
■ Off
Turns off MP3 output.
■ PCM
Outputs 2-channel digital audio from the optical or coaxial digital audio jacks.
4
Highlight OK , then press ENTER .