Gateway DVD Player - Manual (Page 33)

27 www.gateway.com
Configuring CD audio
This option sets the outgoing digital audio format of CD tracks.
To set your CD output format:
1
On the player’s remote control, press STOP , then press SETUP . The Welcome to Setup
screen opens.
2
Use your remote control’s arrow buttons to highlight Digital , then press ENTER . The
Digital audio setup menu opens.
3
Highlight CD , then press the buttons to select:
■ Original
Outputs CD digital audio from the optical or coaxial digital audio jacks in its
original format.
■ Off
Turns off CD audio output.
■ PCM
Outputs 2-channel digital audio from the optical or coaxial digital audio jacks.
4
Highlight OK , then press ENTER .