Gateway DVD Player - Manual (Page 38)

32 www.gateway.com
Configuring Pro Logic virtual surround sound
The player has a built-in Dolby Pro Logic decoder to provide virtual surround sound for
PCM (stereo) from the 5.1-channel analog audio jacks.
To adjust Pro Logic settings:
1
On the player’s remote control, press STOP , then press SETUP . The Welcome to Setup
screen opens.
2
Use your remote control’s arrow buttons to highlight Analog , then press ENTER . The
Analog audio setup menu opens.
3
Highlight Pro Logic , then press the buttons to select:
■ Auto
Outputs stereo audio soundtracks in Dolby Pro Logic mode.
■ On
Outputs all audio soundtracks in Dolby Pro Logic mode.
■ Off
Turns off Dolby Pro Logic.
4
Highlight OK , then press ENTER .