Gateway DVD Player - Manual (Page 76)

70 www.gateway.com
Playing discs
Before you begin:
1
Turn on the player using the POWER button on the front of the player. If the player
is in Standby power mode, press POWER on the remote control. The Power LED turns
green.
2
Turn on your TV, then set it to the audio/video input connected to the DVD player.
3
Turn on your audio system (if using an external amplifier or audio system), then set
it to the audio input connected to the DVD player.
To play a disc:
1
Press OPEN/CLOSE on the remote control or on the front of the player. The disc tray
opens.